Arcade Controller GPIO Interface for Raspberry Pi

Connect your joystick and buttons wiring loom to a Raspberry Pi using our GPIO interface, using 2 x 8-bit parallel to serial shift registers to send input data to the Raspberry Pi.

V2.0 Updated Features: New is the addition of USB connection, this will allow the adapter to be used as either a stand alone USB interface board or it can be mounted to a Raspberry Pi and be used as a USB joystick when the Pi is not in use. You will sitll need to use the SNESDev drivers when connected to the GPIO of a Raspberry Pi. Please se our installation guide for further information.

This adapter is available with and without a wiring harness so it can be used in your own arcade controller projects.